MEMMERT IN 30 INCUBATOR

Spesifikasi Produk

Deskripsi

Temperature Setting temperature range +20 to +80 °C Working temperature range at least 5 above ambient temperature to +80 °C Setting accuracy temperature 0.1 °C Temperature sensor 1 Pt100 sensor DIN class A in 4-wire-circuit Control technology ControlCOCKPIT SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days Function SetpointWAIT the process time does not start until the set temperature is reached Calibration three freely selectable temperature values adjustable parameters temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime Ventilation Convection natural convection Fresh air Admixture of pre-heated fresh air by electronically adjustable air flap Vent vent connection with restrictor flap Communication Documentation programme stored in case of power failure Programming AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand). Safety Temperature control adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature Autodiagnostic system for fault analysis Standard equipment Works calibration certificate incl. works calibration certificate for +37°C Door fully insulated stainless steel door with 2-point locking (compression door lock) Door inner glass door Internals 1 stainless steel grid(s), electropolished Stainless steel interior Interior easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides Volume 32 l Dimensions w(A) x h(B) x d(C): 400 x 320 x 250 mm Max. number of internals 3 Max. loading of chamber 60 kg Max. loading per internal 20 kg Textured stainless steel casing Dimensions w(D) x h(E) x d(F): 585 x 704 x 434 mm (d +56mm door handle) Housing rear zinc-plated steel Electrical data Voltage Electrical load 230 V, 50/60 Hz approx. 1600 W Voltage Electrical load 115 V, 50/60 Hz approx. 800 W Ambient conditions Set Up The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm. Altitude of installation max. 2,000 m above sea level Ambient temperature +5 °C to +40 °C Humidity rh max. 80 %, non-condensing Overvoltage category II Pollution degree 2 Packing/shipping data Transport information The appliances must be transported upright Customs tariff number 8419 8998 Country of origin Federal Republic of Germany WEEE-Reg.-No. DE 66812464 Dimensions approx incl. carton w x h x d: 660 x 890 x 650 mm Net weight approx. 48 kg Gross weight carton approx. 64 kg